Easily switch to contactless cleaning; the ProNano Starter Pack Wheel Clean contains the essentials for a basic ProNano Washing for vehicles such as passenger cars, trucks, vans and pick-ups. In three simple steps you will experience the ultimate washing result. Get started right away!

The ProNano Starter Package Wheel Clean contains:

1x ProNano Plus (1L - concentrate)
1x ProNano Diamond Nano Wax (1L - concentrate)
1x ProNano Wheel Clean (750ml - ready to use)

ProNano ProNano Plus

The ProNano Plus is an innovative single-phase cleaner developed for contactless and scratch-free cleaning of various vehicles. The product has been developed on the basis of Nano Technology, which results in a deep cleaning effect. In addition, the ProNano Plus has a color and gloss-enhancing effect and anti-corrosion properties.

Mixing ratio:
Foam method (foam lance/foam gun): Mix 250ml ProNano Plus with 750ml water (in a 1 liter foam cup).
Low pressure method (low pressure pump): Mix 50ml ProNano Plus with 950ml water (in a 1 liter pump). The low-pressure method does not create foam.

Usage:
Shake well before use. Spray the vehicle from bottom to top. Wait 1 - 2 minutes and spray off with a high-pressure cleaner of max. 145 bar.

ProNano Diamond Nano Wax

The ProNano Diamond Nano Wax is a wax with a triple formula: it dries the surface of the washed vehicle; gives the treated surface optimal paint protection and a deep shine; it makes the vehicle water and dirt repellent for 2 - 3 months. The product is based on Nano Technology which results in deep protection.

Mixing ratio:
Foam method (foam lance/foam gun): Mix 100ml Diamond Nano Wax with 900ml water (in a 1 liter foam cup)
Low pressure method (low pressure pump): Mix 15ml Diamond Nano Wax with 985ml water (in a 1 liter pump). The low-pressure method does not create foam.

Usage:
Shake well before use. Spray the vehicle from bottom to top. Wait 30 - 60 seconds and rinse thoroughly to remove excess wax residue with a pressure washer.

ProNano Wheel Clean

ProNano Wheel Clean is a degreasing rim cleaner developed for steel, painted and powder-coated rims. This powerful cleaner easily removes stubborn grease pollution, including oil. Due to the contactless application, the product is easy to apply and the use of brushes and sponges is unnecessary.

Usage:
Spray the product on the rims. Wait 60 - 80 seconds and rinse thoroughly with a pressure washer.

Contactless cleaning

Non-contact cleaning is a two-step process, you clean your vehicle, then protect your vehicle with a wax. This method ensures an optimal result every time. The wax provides a hydrophobic protective layer on your paintwork that repels water and dirt for 2-3 months . By following these two steps you will keep your vehicle in optimal condition and you will find that cleaning becomes easier and more effective.

Do you want to switch from traditional cleaning to contactless cleaning or have you not thoroughly cleaned your vehicle for more than 3 months ? In either case, there may be a layer of static buildup on your vehicle. You can recognize static pollution by the black layer on the paint that remains on your fingers when you touch the vehicle after cleaning. To remove this type of pollution, it is necessary to use a sponge, microfiber glove or brush. In this case it is recommended to use the traditional hand washing method.

Nanotechnology
ProNano products are developed on the basis of Nano Technology, which results in a deep cleaning effect. Thanks to nano-molecules, small particles that can penetrate deep into the surface, the cleaning process goes further than with an average cleaner. This leads to a more thorough cleaning of the surface. In addition, the gloss and high gloss of the surface are strengthened and restored, and you will experience a more intense color experience.